If your washing machine has a fault and refuses to cooperate, it doesn’t always mean that you need to fully replace it with a new one. There could be various reasons for this issue, so it’s definitely worth seeing if an appliance repair company like Capital Repairs can fix it. Repairing a faulty washing machine rather than getting rid of it isn’t just a more affordable option, it’s also much more environmentally friendly and convenient.
Common Issues
- No Water Drainage
Another issue that can arise with your washing machine is an inability to drain properly or enter the machine. When your washing machine’s cycle has finished, you may find that there is excess water in the bottom of the drum. You may also be able to hear water running but it isn’t draining or going into the machine.
First check the pipes by removing the plug from the machine. Check that the hose is without hindrance. Make sure to check for coins, lint, keys, loose socks etc in the hose. Next check the drain pump for small items or clothing that may be obstructing the impeller.
- Leaking Water
You might come into the kitchen or utility room after a wash cycle and notice a pool of water coming from your washing machine. A water leak in your washing machine may be as a result from a blocked or damaged drain pipe, a water intake valve is damaged, or there is damage to the seal causing a door leak. First, turn off unplug your washing machine before checking for faults or blockages. Check the drain hose and make adjustments if required. If the draining hose is clean, the door seal or entry valve might be the cause.
- Won’t Start or Turn On
A washing machine not turning on is a frequently encountered fault for many homeowners. First, what you’ll want to do is check the plug socket for any issues. This could be as simple as the plug not being all the way into the socket, or as complex as the fuse of the plug breaking. Second, determine if the outlet causes the fault by trying to connect another device to the same socket.
Next try the control board, or even the power cable for the appliance, could be a problem. It is recommended that you contact an expert qualified to determine the fault in this instance.
- Won’t Spin or Drain Properly
If your washing machine drum or motor is broken, worn, or damaged you may notice laboured spinning or no spin at all on certain or all washing machine settings. As with any repair, make sure to unplug the appliance first and foremost. If the issue is with the washing machine’s belt you can use the washer’s manual to guide, you in fixing it. If it appears to be another issue or you’re unsure feel free to call an engineer from Square Repairs
- Unusual Noise
Washing machines are bound to generate some noise when they fire up. But, if there is excessive noise, it could signify an issue. If you’ve washed large items like a blanket or sneakers, it can make lots of noise in the drum due to an unbalanced load. Try spreading loads evenly and see if that makes less noise in the drum. If the device continues to make sound, it could be due to damage to the drum bearing. Worn bearings in a washing machine make lots of noise. It could also be due to a broken motor mount in the machine.
Looking for Washing Machine Repairs in Basingstoke. Contact Service 87.
6. Clothes aren’t clean after wash cycle
If you’ve opened your washing machine after a wash and noticed that your gym gear still smells or there’s no fresh fragrance you may want to inspect your washing machine. First, check the detergent tray for blockages because if the detergent isn’t able to reach your clothes, your machine won’t be able to wash properly. To add to this, if there is a blockage, eventually detergent, germs and even mould will build up and transfer onto your laundry. This will also happen if the filter is clogged, or the drainage pipe is blocked. There might also be a timer issue preventing the clothes from being cleaned for the requisite time needed to complete the washing cycle.
7. Not Heating Water
If your washing machine isn’t heating water, there are a few things you can check before calling an engineer. First, make sure you’ve selected a hot water cycle. Some cycles, like eco or delicate, use cold water only. Also, check the water temperature at the faucet. If it’s not hot, there might be an issue with your washing machine’s heating element or thermostat issue. Finally, inspect the washing machine’s hoses for any kinks or blockages.
8. Vibrating Excessively or Moving
An unbalanced load occurs when the laundry is not evenly distributed in the drum.
This can cause the machine to vibrate and even move around during the spin cycle. To fix this, simply stop the machine and redistribute the laundry.
An uneven floor can also cause the washing machine to vibrate. If the floor is not level, the machine will not sit properly and will be more likely to shake. To fix this, you can adjust the feet on the bottom of the machine or place it on a level surface.
Worn-out shock absorbers can also cause the washing machine to vibrate. Over time, the shock absorbers can become worn out and no longer be able to absorb the vibrations from the spin cycle. If you think this may be the problem, you will need to replace the shock absorbers.
9. Detergent Drawer Blockage
The blockage can be caused by a build-up of detergent, fabric softener, or other debris. This can prevent the detergent from reaching the wash cycle, leaving your clothes dirty.
To unblock your washing machine detergent drawer, you will need to remove the drawer and clean it thoroughly. You can use a toothbrush or other small brush to scrub away any build-up. Once the drawer is clean, you can reinsert it into the washing machine.
10. Foul Smell
Usually caused by a buildup of mold, mildew, or bacteria, this can happen if the machine is not cleaned regularly or if it is not used often enough. The good news is that there are a few simple things you can do to get rid of the smell. First, clean the machine thoroughly, including the drum, door seal, and detergent dispenser. You can use a mixture of vinegar and water or a commercial cleaning product. Second, run a hot water cycle with no clothes in the machine. This will help to kill any remaining mold or bacteria. Finally, leave the door open to allow the machine to air out.